| Course No. |
Course Title |
Credits |
| |
| DTT 141 |
Introduction to Truck/Trailer Service Field |
4 |
| This course covers information on hand tools, machines and equipment common to the truck field, general service procedures, lubricants, reference manuals, pre-delivery inspection of new and used trucks/trailers, and preventive maintenance procedures. |
| |
| DTT 142 |
Air Brake Systems |
4 |
| This course covers information on air brake systems. Mechanical foundation and air supply and service system principles, major components, parking brake systems, brake system diagnostics, service to drum brake assemblies, air lines and hoses, brake switches, antilock brake principles and service are all a part of this course. High priority tasks recommended by ASE (Automotive Service Excellence) are covered. This will prepare students to take the ASE technician certification test in Brakes. |
| |
| DTT 143 |
Steering & Suspension |
4 |
| This course covers information on steering and suspension systems, theory and principles, independent suspensions, geometric principles, factors affecting wheel alignment, tools and equipment used for steering and suspension, troubleshooting of suspension and steering, wheel bearings service, manual steering, and power steering systems operation. |
| |
| DTT 144 |
Electrical & Electronic Systems |
4 |
| This course covers information on electricity, basic electricity circuits, tools and equipment, batteries, charging systems, starting systems, lighting systems, horn, wiper and washers, cooling fan and instrument circuits, and body electrical system. |
| |
| DTT 145 |
Diesel Fuel Injection Systems |
4 |
| This course covers information on the theory and operation of the different types of diesel fuel injection pumps, nozzles and injectors, including current electronic fuel injectors. In-depth study of fuel system preventive maintenance, troubleshooting diagnostics, injection pump timing and installation procedures, and replacement methods for injectors and nozzles are taught. |
| |
| DTT 146 |
Diesel Engine Overhaul |
4 |
| Diesel engine principles of operation on four- and two-stroke engines are covered. Component identification, measurement and replacement, along with complete tear down and overhaul procedures are covered in this course. This will prepare students to take the ASE technician certification test in Diesel Engines. |
| |
| DTT 241 |
Diesel Engine Performance and Tune-up Procedures |
4 |
| This course covers information and practical experience on the operation and approved servicing, troubleshooting, and tune-up procedures on several different current models of diesel engines. |
| |
| DTT 242 |
Manual Transmission Overhaul |
4 |
| This course covers the information and service experience in truck manual transmissions. New learning experiences include inspection, replacement, servicing and rebuilding of manual transmissions and power take-off systems. High priority tasks recommended by ASE are covered. |
| |
| DTT 243 |
Differentials & Drive Line |
4 |
| This course covers the information, overhaul, service and troubleshooting of the rear differentials and drive shaft. High priority tasks recommended by ASE are covered. |
| |
| DTT 244 |
Automatic Transmission Diagnostics, Basic Hydraulics |
4 |
| This course provides information and practical experience necessary to service automatic transmissions found in many heavy diesel trucks. Systematic troubleshooting procedures are all part of this program to assist the technician in the proper repair procedures, installation, and repair of hydraulic systems. |
| |
| DTT 245 |
Heating, Air Conditioning, Refrigeration |
4 |
| This course covers the fundamentals of the heating, air conditioning and refrigeration systems as applied to today’s trucks and refrigerated trailers. New learning experiences in the troubleshooting and servicing of these systems are taught. High priority tasks recommended by ASE are covered. This will prepare students to take the technician certification test in Heating, Ventilation, and Air Conditioning. |
| |
| DTT 246 |
Applied Diesel Principles and Applications |
4 |
| This course is intended to re-examine and emphasize specific mechanical skills and diagnostic techniques and to apply them to principles and theories learned in previous modules. Students are expected to hone the specific skills to prepare them for entry-level positions upon graduation. |
| |
| DTT 247 |
Internship |
4 |
| This work experience is designed to expose the student to an industrial, commercial, or clinical environment. Students are placed into a contracted facility after completing 50 credit hours, having a 2.00 GPA, and meeting all other program prerequisites and academic requirements prior to their final spring semester. Students are expected to adhere to all policies and regulations associated with the facility. Students will work on projects selected to expose the student to “live” work situations, while building upon the student’s knowledge, skill and attitude as an entry-level technician and will be used to grade the student’s performance for the course. (No compensation) |
| |
| DTT 248 |
Cooperative Educational Experience |
4 |
| This work experience is designed to expose the student to an industrial, commercial, or clinical environment. Students are placed into a contracted facility after completing 50 credit hours, having a 2.00 GPA, and meeting all other program prerequisites and academic requirements prior to their final spring semester. Students are expected to adhere to all policies and regulations associated with the facility. Students will work on projects selected to expose the student to “live” work situations, while building upon the student’s knowledge, skill and attitude as an entry-level technician and will be used to grade the student’s performance for the course. (Compensation) |
